Virtual Marine Arsenal

Autoload is a cargo management, onboard stability and stowage planning software. Cargo Management software must do more than just plan where to stow your profits depend on managing time and data.

Cybermaster is an onboard ship load and stability indicating software with different modules can be customized for FPSO, General Cargo Vessel, Bulk Carriers, Oil/Chemical Tankers, Gas Carriers, Container Vessels, Passenger Vessels, Semi-Submersibles and Jackup Rigs.

Delftload is an on board stability calculation program for almost any type of vessel. Loading conditions generated with Delftload are analyzed using a accurate 3D computer model of the ship.

GHS Load Monitor (GLM) is a software program used aboard ships to monitor stability and/or strength with various loads. It gives vessel operators the ability to quickly check the safety of present and anticipated loading conditions. GLM does not rely on precomputed hull and tank characteristics; rather, it computes these directly from geometrical models of the ship and its tanks.

The HST program is the Wolfson Unit's Hydrostatics, Stability and Tank Capacities Program allowing both the definition of hull geometry and also the calculation of the standard hydrostatic and stability parameters of a vessel as well as tank capacity data.

LoadSafe cargo loading and damage control system is a computer program to meet various recently imposed unilateral and international requirements to ships and owners (SOLAS, MARPOL, OPA 90 etc.) for calculation of intact and damage stability and longitudinal strength.

LocoPias is on-board loading computer software. Derived from the Pias software, it uses the same technology to achieve optimum loading within the limits for strength, stability, draft, etc.

Multiload is a software system to carry out the complex ship loading calculations.

Napa Loading Computer ensures safe and optimal planning of stowage, cargo and ballast for different ship types. The system covers a wide range of calculations related to hydrostatics, intact stability and longitudinal strength.

The Nautilus Stability Master is a program displays the ship in three views, showing all of the ship's compartments and how much each one is filled. The program will automatically recalculate the new weight distribution curve and then find the final sink-trim-heel condition of the vessel. The vessel will be displayed in this trim condition and all hydrostatics, stability, and strength results will be displayed.

SeaWeigh is an on-board loading computer system based upon the Paramarine framework and employing a 3D Paramarine model aboard ship to aid in optimisation of loading and performance.

WSLP2 is a software for predictive and real-time, loading, stability and stress analysis for floating structures.